必威官方首页-必威国际登陆平台-登录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
How to lock self locking switch for self locking

Release time:2018-07-07    Clicks: Click

 
Many friends do not know how to lock self lock when using the light touch lock switch. We give you a brief introduction today. It is convenient for us to carry out the self locking operation. The details are described in detail in the following details.
必威官方首页
How can we avoid such a situation due to the fact that the contacts of the self-locking switch are easily ablated under the impact of a large current? Xiaobian, based on years of experience, introduces a self locking circuit which touches the self-locking switch, which can effectively avoid this situation.
When AN is not pressed, the SCR1 is not turned on, and the relay or contactor K does not act, which is equivalent to the "disconnect" state. Press AN, 12V voltage through R1, AN, VD1 for SCR1 to provide trigger current to make it conductive, K power, contacts connected to load work. Because the voltage at both ends of the capacitor can not be changed, SCR2 does not turn on when AN is pressed, and the current is charged to C by R3 and VD2. If AN is pressed again, the voltage on the capacitor C is the trigger voltage of the SCR2, so that the SCR2 is closed when AN is closed, the anode voltage of SCR1 is reduced, SCR1 cutoff, and K is released. The capacitor C is discharged through the control pole and cathode of R2 and SCR2, and the circuit is restored to its original state. Thus the self locking effect is realized.
  
Product display
Click here to send me a message

必威官方首页|必威国际登陆平台

XML 地图 | Sitemap 地图